FAUCETS

A faucet is a device for delivering water form a plumbing system. it consists of the following components : Spout, handle(s), lift rod, cartridge, aerator, mixing chamber, and water inlets. When the handle is turned on, the valve opens and controls the water flow adjustment under any water or temperature condition. The faucet body is usually made of brass, though diecasting and chrome.

Cartaidge :

Cartridge faucets have a hollow metal cartridge insert that seals against the spout of faucet body. Depending on how a series of holes in the cartridge align with the stem, water is mixed and controlled. Drips usually mean the cartridge needs replacing. Cartridge faucets are referred to as “washerless” because they control flow using methods other than a washer and valve seat (though they do have O-rings and seals to prevent leaking). We make a washerlss single-habdle faucet with a hollow brass cartridge insert that seals against the inside of the faucet body with O-ring. Water flow is controlled by an up-and-down movement of the cartridge; to change water temperature, you need to just rotate the handle.

Aerators :

We uses Neopear Aerators prevent splashing shaping the water stream coming out of the faucet spout, to produce a straight and evenly pressured stream. It has multiple benefits like water conservation reduction in energy costs and Reducing faucet noise To increase the perceived water pressure, (often used in homes with low water pressure)

Chrome Finish :

Upper shiny protection layer provides a mirror finish to every faucet. High plating thickness (Nickel : 10 microns and chrome : 0.3 microns) provides tolerance to extreme climate and water condition. 400 + hours of self spray test ensures our finishes are highly durable and corrosion resistant for a much longer duration. TM Bath Fittings An ISO 9001 : 2008 Certified Company.

ABOUT FIGO